Double-sided printing, explained
See how one machine prints the front and back of the fabric in a single job.
Get a quote
The fabric path, step by step
One carriage prints the front of the fabric and the other prints the back, in the same run.
Unwind roll. Blank fabric feeds out under constant tension.
Guide and tension rollers. Keep the fabric flat and square on its way into the print zone.
Pre-dryers. Warm both faces before printing, so the ink lands on dry fabric and stays sharp.
Front carriage. Staggered rows of printheads face the front of the fabric. The carriage scans across the width as the fabric moves up.
Back carriage. A matching head set faces the back face and prints in the same pass.
Dryers. Dry the ink on both faces before the fabric touches a roller.
Drive and pressure rollers. A rubber-covered roller pulls the fabric up; the pressure roller keeps it from slipping.
Take-up roll. The fabric winds up printed on both faces.
Two carriages, one for each face
On our flag and textile printers, two carriages sit on opposite faces of the fabric, one printing the front and one the back. The fabric runs roll to roll between them and is dried before and after printing. Both faces are finished in one pass through the machine, and the artwork for each side is set in the same job, so flags and double-sided fabric banners stay in register without a second print run.
Flag printers
What you can print on both sides
Choose by fabric
Tell us what you print
Send us your material, print width and the products you make. We will recommend a model, head setup and ink, and reply with a quote.
sales@yaselanprinters.com
- 1Tell us the jobYour material, print width and the products you make.
- 2Get a recommended setupWe suggest a model, head setup and ink set for that job.
- 3Receive a quotePriced for the configuration we recommend.




