Flag printers

DS-2200T-ON

The DS-2200T-ON is a 2,150 mm double-sided flag printer with a built-in oven. Fabric is dried inside the machine before and after printing, so it comes off ready for the next step.

DS-2200T-ON double-sided flag printer with built-in oven.
Print width
2,150 mm
Print width
2,150 mm
Ink
Reactive / Acid / Disperse
DS-2200T-ON

Features

01

Heater built into the machine

The ON version adds an integrated heating system to the 2.2 m textile platform. Fabric is dried before and after printing, and the temperature is adjusted to the material, so printed rolls come off ready to handle. Maximum power is 7 kW, including 5 kW for heating.

02

Natural and synthetic fabrics

The DS-2200T-ON prints natural fibers as well as synthetic fabrics, banner cloth and lightbox cloth. It takes rolls up to 350 mm in diameter across a 2,150 mm print width.

03

Works with your RIP

Jobs are prepared in Maintop, PrintFactory or NeoStampa, so most textile shops can keep the RIP workflow and color profiles they already use. The machine, heater included, weighs 2,450 kg and measures 4,950 × 1,835 × 2,023 mm.

Print method

Double-sided printing

Printing method
Double-sided, two carriages
Media
Natural fibers, synthetic fabrics, banner cloth, lightbox cloth
Front and back artwork
The same image on both faces, the same image with a different color on the back, or a different design on each face.
Technical data

Specifications

Download spec sheet (PDF)
ModelDS-2200T-ON
PrintheadsRicoh / Epson / Kyocera (optional)
Max roll diameter350 mm
Print width2,150 mm
RIP softwareMaintop / PrintFactory / NeoStampa
File formatsTIFF / JPG / EPS / PDF
InterfaceTCP/IP network, USB
Operating systemWindows 7/10, 64-bit (Professional or Ultimate)
ComputerIntel i5, 8–16 GB RAM, 500 GB SATA disk (NTFS)
DryingDries before and after printing; temperature set for each fabric
MediaNatural fibers, synthetic fabrics, banner cloth, lightbox cloth
Power7 kW (including 5 kW heating)
Operating environment20–30 °C, 40–70% humidity
Power supplyAC 220 V ±10%, 50 Hz
Net weight2,450 kg
Machine dimensions (L × W × H)4,950 × 1,835 × 2,023 mm
Shipping dimensions (L × W × H)5,050 × 1,935 × 2,123 mm
Ink
Textile inks matched to the fabric: reactive and acid for natural fibers, disperse for polyester.
Options
Ricoh, Epson or Kyocera printheads. RIP software: Maintop, PrintFactory or NeoStampa. Drying temperature is adjustable for each fabric.
Get a quote

Ask for a quote on this printer

Send us your material, print width and the products you make. We will recommend a model, head setup and ink, and reply with a quote.

  1. 1Tell us the jobYour material, print width and the products you make.
  2. 2Get a recommended setupWe suggest a model, head setup and ink set for that job.
  3. 3Receive a quotePriced for the configuration we recommend.
Get a quote