Double-sided flag printers
These printers print both sides of the fabric in one run, with no transfer step. They make feather flags, pole flags, hanging banners and backlit fabric, in print widths of 1.7 m, 2.15 m and 3.2 m. For cotton and silk, see the Binary Star S10.

- Print width
- 1.7–3.2 m
- 3 models
- Top speed at 2 pass
- 150 m²/h
- DS-2200T-ON with Kyocera heads
- Printhead brands
- 3
- Epson, Kyocera, Ricoh
- Ink types
- 3
- Disperse, reactive, acid
Choose a flag printer by width and build
For flag fabric, lightbox fabric and other polyester fabrics, choose 1.7 m, 2.15 m or 3.2 m.

DS-1700T
Printing and fixation are separate steps. Fixation runs on a separate unit.
- Print width
- 1.7 m
- Printheads
- Epson i3200-A1
- Speed
- 90 m²/h at 2 pass
- Ink
- Disperse

DS-2200T-ON
Built-in oven. The fabric is dried and fixed inline.
- Print width
- 2.15 m
- Printheads
- Kyocera, Ricoh or Epson
- Speed
- 150 m²/h at 2 pass (Kyocera)
- Ink
- Disperse, reactive or acid

DS-3200T-ON
Built-in oven with pre-drying, for fabric up to 3.2 m wide.
- Print width
- 3.2 m
- Printheads
- Kyocera, Ricoh or Epson
- Speed
- 120 m²/h at 2 pass (Kyocera)
- Ink
- Disperse or reactive
Not sure which one fits? Tell us your fabric, roll width and daily output, and we will match a model and head setup.
Get a quoteSeparate fixation or built-in oven
The difference is where the color is fixed. The DS-1700T comes in both builds. On the wider models, ON in the name means the oven is built in.
Separate fixation
- Fixation
- After printing, the fabric goes through a separate fixation unit.
- Fabric output
- Wound onto a take-up roll.
- Models
- DS-1700T
Built-in oven (ON)
- Fixation
- Drying and fixation are done inline. The fabric needs no separate fixation step afterward.
- Fabric output
- Wound onto a take-up roll, or fed into a collection bin.
- Models
- DS-2200T-ON, DS-3200T-ON, and the oven version of the DS-1700T
Compare the models
Speed tables for every pass mode are on the model pages.
![]() | ![]() | ![]() | |
| DS-1700T | DS-2200T-ON | DS-3200T-ON | |
|---|---|---|---|
| Print width | 1.7 m | 2.15 m | 3.2 m |
| Printheads | Epson i3200-A1 | Kyocera KJ4B-0300 or KJ4B-0600. Ricoh or Epson optional. | Kyocera KJ4B-0300 or KJ4B-0600, or Ricoh G6. Epson optional. |
| Speed | 90 m²/h | 150 m²/h (Kyocera) | 120 m²/h (Kyocera), 80 m²/h (Ricoh G6) |
| Ink | Disperse | Disperse, reactive or acid | Disperse or reactive |
| Colors | CMYK | CMYK plus Lm and Lc. Four spot colors optional. | CMYK plus Lm and Lc. Four spot colors optional. |
| Fabrics | Flag fabric, lightbox fabric and other polyester fabrics | Flag fabric, lightbox fabric and other polyester fabrics | Flag fabric, lightbox fabric and other polyester fabrics |
Speeds are at 2 pass.
Optional spot colors: orange, blue, fluorescent magenta and fluorescent yellow.
Video and machine details
Constant-tension feed and take-up
Magnetic particle tension control, with twin 110 mm rubber rollers feeding the fabric. Tension is set to the fabric thickness, so the roll winds evenly.
DS-1700T, DS-3200T-ON
Ink mist collection
Two ink mist collectors on each carriage, four in total.
DS-1700T
Automatic head cleaning
The heads are purged and cleaned automatically, and kept moist when idle.
DS-1700T, DS-2200T-ON
Carriage crash protection
Four anti-collision devices on the carriages, covering both directions of travel.
DS-2200T-ON, DS-3200T-ON
Fabric edge clips
For fabric with frayed or curled edges, clips hold the edge flat during printing.
DS-2200T-ON, DS-3200T-ON
Rolls up to 350 mm
Takes fabric rolls up to 350 mm in diameter.
All models
Want to see another model printing? Join a video call and watch it run at our factory.
Book a live video demoCommon questions
Is the color as strong on the back as on the front?
Yes. There is a print carriage on each side of the fabric, and each side is printed directly in the same run. On a single-sided print, the back is only the ink that soaks through, so it is paler and mirrored.
How double-sided printing worksEpson, Kyocera or Ricoh heads: how do I choose?
Choose by daily output. On the DS-3200T-ON, Kyocera heads print 120 m²/h at 2 pass and Ricoh G6 heads print 80 m²/h. Tell us your daily output and we will recommend a head setup.
Which ink goes with which fabric?
Flag fabric, lightbox fabric and other polyester fabrics take disperse ink, and all three models run it. For cotton, silk and other natural fabrics, see the Binary Star S10, which runs reactive, acid and pigment ink.
Do I need transfer sheets?
No. The ink goes straight onto the fabric, so there is no transfer media to buy and no transfer press step. The printed fabric is then fixed with heat, in the built-in oven or on a separate unit.
Sublimation printer buying guideCan I see it print before I order?
Yes. Ask for a free sample print on the model you are considering, or book a live video demo and watch the printer run at our factory.
Where are the printers made?
In Shanghai. R&D and production are both there. Yaselan was founded in 1997. Exports account for more than 65% of our sales, and our customers are in more than 70 countries.
Tell us what you print
Send us your material, print width and the products you make. We will recommend a model, head setup and ink, and reply with a quote.
sales@yaselanprinters.com
- 1Tell us the jobYour material, print width and the products you make.
- 2Get a recommended setupWe suggest a model, head setup and ink set for that job.
- 3Receive a quotePriced for the configuration we recommend.











