Flag printers

DS-3200T-ON

The DS-3200T-ON is a 3,200 mm double-sided flag printer with a built-in oven. Fabric is pre-dried and heated inside the machine, so wide rolls come off ready for finishing.

DS-3200T-ON double-sided flag printer with built-in oven.
Print width
3,200 mm
Print width
3,200 mm
Ink
Reactive / Disperse
DS-3200T-ON

Features

01

Pre-drying and heater built in

The ON version builds the heat treatment into the printer: 5.6 kW of pre-drying and a 16.8 kW heater. Fabric is dried before and after printing, with the temperature set for each material, so a separate heating unit is not needed next to the printer.

02

3.2 m for wide textiles

A 3,200 mm print width covers wide flags, backdrops and backlit fabric for large lightboxes. The printer handles synthetic fabrics, banner cloth and lightbox cloth from rolls up to 350 mm in diameter.

03

Size, weight and RIP

The machine measures 6,135 × 2,135 × 2,217 mm and weighs 3,600 kg, with a maximum power of 25 kW. Jobs run from Maintop, PrintFactory, NeoStampa or PhotoPrint, so you can keep the RIP software your team knows.

Print method

Double-sided printing

Printing method
Double-sided, two carriages
Media
Synthetic fabrics, banner cloth, lightbox cloth
Front and back artwork
The same image on both faces, the same image with a different color on the back, or a different design on each face.
Technical data

Specifications

Download spec sheet (PDF)
ModelDS-3200T-ON
PrintheadsRicoh / Epson / Kyocera (optional)
Ink typeReactive, Disperse
Max roll diameter350 mm
Print width3,200 mm
RIP softwareMaintop / PrintFactory / NeoStampa / PhotoPrint
File formatsTIFF / JPG / EPS / PDF
InterfaceTCP/IP network, USB
Operating systemWindows 7/10, 64-bit (Professional or Ultimate)
ComputerIntel i5, 8–16 GB RAM, 500 GB SATA disk (NTFS)
DryingDries before and after printing; temperature set for each fabric
MediaSynthetic fabrics, banner cloth, lightbox cloth
Power25 kW (including 5.6 kW pre-drying and 16.8 kW heater)
Operating environment20–30 °C, 40–70% humidity
Power supplyAC 380 V ±10%, 50 Hz
Net weight3,600 kg
Machine dimensions (L × W × H)6,135 × 2,135 × 2,217 mm
Shipping dimensions (L × W × H)6,300 × 2,000 × 2,500 mm
Ink
Reactive or disperse textile ink.
Options
Ricoh, Epson or Kyocera printheads. RIP software: Maintop, PrintFactory, NeoStampa or PhotoPrint. Drying temperature is adjustable for each fabric.
Get a quote

Ask for a quote on this printer

Send us your material, print width and the products you make. We will recommend a model, head setup and ink, and reply with a quote.

  1. 1Tell us the jobYour material, print width and the products you make.
  2. 2Get a recommended setupWe suggest a model, head setup and ink set for that job.
  3. 3Receive a quotePriced for the configuration we recommend.
Get a quote