
Double-sided flag printing
Our flag printing machines print both faces of polyester flag fabric in one job, with disperse ink direct to fabric. The two sides are in register, the flag stays a single light layer, and there is no second print or sewing step.
Why print flags on both sides
A single-layer flag printed on one side relies on ink strike-through, so the back shows a reversed, paler image. Sewing two printed flags together fixes that, but doubles the fabric, the weight and the labor. Double-sided flag printing gives a full-color, right-reading image on each face of one layer, and the flag stays light enough to fly in a breeze.



From artwork to finished piece
- 01
Prepare front and back
Set the artwork for each face in the RIP: the same design on both sides, the same design with a different color treatment, or a different design on the back, such as a second language.
- 02
Print both faces
The printer prints the front and back of the fabric in one job, with drying before and after printing. The roll comes off the printer finished on both sides.
- 03
Finish and sew
Fix the ink as your fabric requires, then cut, hem and add the pole sleeve or grommets, the same finishing you use for any printed flag.
Fabrics
Polyester flag fabrics and knitted polyester print directly with disperse ink. Banner cloth and other synthetic fabrics run on the same machines. For cotton, silk and other natural fibers, see the Binary Star S10.

Printing guides



Tell us what you print
Send us your material, print width and the products you make. We will recommend a model, head setup and ink, and reply with a quote.
sales@yaselanprinters.com
- 1Tell us the jobYour material, print width and the products you make.
- 2Get a recommended setupWe suggest a model, head setup and ink set for that job.
- 3Receive a quotePriced for the configuration we recommend.


